Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Transmission - Rearend> Lengthening shift points in a TH350
User Name
Password
lost password?   |   register now

Thread: Lengthening shift points in a TH350 Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
12-27-2003 06:46 AM
Igosplut Provided that everything is functioning right, get a trans-go recalibration kit. I've found that they have the most versatile and best working kits, and have had great results with them (especially with 904s and 700R4s). I think Summitt offers them.
12-26-2003 11:57 PM
krp WOT shifts controlled by govenor, modulator and vacuum have little affect on shift point. Part throttle shifts controlled by modulator pressure being overcome by govenor pressure, modulator and vacuum have large affect on shift point. Spring behind modulator valve will lower part throttle shift points as will turning out the screw in an adjustable mod. Turning in the screw or removing the spring (which is not stock and put in as part of some shift kits) will increase part throttle shift points. Detent cable on 350 controls kick down only, if stuck will cause late part throttle shifts but no effect on WOT shifts. If disconnected it can cause WOT shifts to be early but no other problems. If cable/detent valve isn't stuck and you have a good vacuum modulator, and good vacuum to it and still have concerns with your shift points, get yourself a govenor recalibration kit. Heavier springs and weights lower shift points and lighter springs and weights raise them. Springs have more effect on part throttle shifts and weights have more effect on WOT shifts, but both affect both shift points to some degree, so some trial and error will be required. Good luck.
12-15-2003 10:51 AM
Big86inthestixx
no spring

i have already pulled the spring out of the modulator.....
12-14-2003 12:51 AM
BstMech Crosley's da'man.

D88, make sure to check the vacuum to the modulator as well as the modulator itself FIRST as well as checking for a froze detent cable. Do what I suggested LAST.
12-13-2003 08:20 PM
Crosley D88....

If the tranny shifts the same all the time, I would also look at the vacuum feed to the tranny. Check the modualtor for oil where the vacuum hose attaches. No oil should come from the niple where the vacuum hose attaches.

Also check the detent cable from the carb to the tranny. IF it's not hooked up, check the cable to see if it is pulled, stuck , melted or something. This will tell the tranny you have your FOOT into the engine and the tranny should shift late.



BIG86.....

Are you working with part throttle shifts or WOT shifts?





Quote:
Originally posted by Big86inthestixx
Can someone please give me some ideas on how to prolong the shift from 1st to 2nd gear? Also i know that i can adjust 2nd to 3rd gear with my modulator but is there any other ways to prolong the shift? The tranny im working on is a TH350, with a B&M shift kit.
12-13-2003 06:12 PM
BstMech
Quote:
Originally posted by D88
i have an Delta 88 with an Olds 350/Th350 and I have the same problem. I am NOT a mechanic. but I would like to know how to change this problem. My transmission will not shift out of FIRST gear until 50 mph and between 35-49 I get hardly ANY acceleration. All i hear is the flowmasters (gotta love the roar!) but as soon as I hit 50, it kicks in and I'm flying again. Can anyone help me?

after reading the first post again, I have the exact opposite problem, but I still need help
You probably have a sticking governor.

It's located toward the rear of the tranny and has a cover that resembles a master cylinder cover (with a wire type retainer). You can remove it and clean it making sure the valve moves freely in it's bore. Beyond that I would do a pressure test (will need a guage or take it to a shop), cause it could be a number of things in the valve body itself.

Usually the transmission will not return to first gear when coming to a stop. Meaning you will be taking off in second or even third gear (possibly explaining the lack of acceleration).
12-13-2003 05:59 PM
D88 i have an Delta 88 with an Olds 350/Th350 and I have the same problem. I am NOT a mechanic. but I would like to know how to change this problem. My transmission will not shift out of FIRST gear until 50 mph and between 35-49 I get hardly ANY acceleration. All i hear is the flowmasters (gotta love the roar!) but as soon as I hit 50, it kicks in and I'm flying again. Can anyone help me?

after reading the first post again, I have the exact opposite problem, but I still need help
12-13-2003 05:52 PM
BstMech If your modulator has a little spring in behind it (as you pull out the modulator), take the spring out and leave it out.
12-13-2003 05:46 PM
Big86inthestixx
Lengthening shift points in a TH350

Can someone please give me some ideas on how to prolong the shift from 1st to 2nd gear? Also i know that i can adjust 2nd to 3rd gear with my modulator but is there any other ways to prolong the shift? The tranny im working on is a TH350, with a B&M shift kit.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 10:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.