|04-30-2013 11:06 PM|
|GypsyR||A TWICE resurrected dead thread! Somebody come back in four years and wake it up again.|
|04-28-2013 09:41 AM|
I've tried all sorts of stuff to get the smell off of the handles from wiping them down with alcohol, to wax and grease remover, to tossing some in the dishwasher. Anything you do is only temporary.
|04-28-2013 09:18 AM|
|gearheadslife||dip then on use rear end gear oil. that fix it.|
|04-28-2013 08:07 AM|
|BigMo||alll of my craftsman plastic handled tools (mostly screw and nut drivers) stink or have a weird smell to them.....i attribute it to stuff on the skin getting on the handles or degradation of the plastic over time, cuz some of the tools are close to 40 yrs old now.....but wrenches and metal stuff? never stink|
|04-27-2013 10:52 PM|
|killeratrod||8 year old thread come on man! new topic for the come on man thread|
|04-27-2013 10:50 PM|
|327NUT||Does anyone read the dates on these posts???? the op asked this question in '04 !! Then 302 Z28 commented on it being an old post.....and the hits just keep coming.|
|04-27-2013 08:46 PM|
|teach123||I've been married twice and the tools of both my husbands stink the same! I've read the "don't close them up" advice and I don't think that's it. The last husband's tools were in a clean cabinet in a clean laundry room in an open tray, and they stank the same as the first husband's tools in a tool box--same awful smell.|
|08-10-2009 11:31 AM|
Sometimes things need to be brought back up.
I had the same problem when I lived in New Orleans. I cloroxed all the tools and got rid of all the drawer liners and anything else plastic. Sprayed the box with a fungicide and that cured it as long as I did it about every 3 months.
|08-10-2009 08:17 AM|
|08-10-2009 07:48 AM|
This thread is OLD, please check the last post date before replying.
|08-10-2009 05:54 AM|
tools that stink
Here is the definitive answer to most tools:
The smell of the Xcelite screwdriver handles is because they are made of a plastic known as cellulose butyrate. One of the components of that is butyric acid, which is the stench of rancid butter and vomit. So that's why they smell, decomposition. I've smelled real butyric acid, and oh my god does it stink to high heaven. (My high school chemistry teacher used some to punish some after-hours users of his classroom who left it a mess. Whole wing of the school stunk for weeks. PU!) I have a small Xcelite toolkit in a blow-molded case. We call it the "baby vomit toolkit."
By the way, I did soak them in Clorox overnight and the smell is still there. Its the Plastic that stinks.
|12-18-2005 11:44 AM|
Common Sense reigns... !!!!!!!!!
|12-18-2005 10:23 AM|
I don't need no stinking tools....
If you find its the Craftsman tools - plastic handles or otherwise - take them back to the store and get replacements. They are lifetime guaranteed and if the smell is so bad you can't use them then I would call that a warrantable condition.
|12-18-2005 08:40 AM|
don't let your wife know
I have ran my tools through the family dish washer when my wife has gone shopping for several hours. Take them out and spray them down with Gibbs oil when done or they will rust in the crome chips. DON'T let your honey know or she'll cope an attitude. I know!
|01-16-2004 05:20 PM|
|dinger||Fabric softener sheets in the bottom of the trays to stink everything up real purty. Dan|
|This thread has more than 15 replies. Click here to review the whole thread.|