|02-04-2004 12:00 AM|
out of room
It's so easy to run out of room. I've got a 28 x 42 3 bay shop.
Mill, lathe , surface grinder, vertical and horizontal bandsaw+workbenches on one side. 4 Post lift (in the bay to the right of the picture, newly added), MIG,TIG,Plasma cutter, blast cabinet,benches,and 2 large storage cabinets along with all sorts of parts on far wall. Wash tank, sheet metal brake and shear, and the built in crane. (thank the guy who built the garage) Compressor in a seperate shed
behind the shop. All heated and insulated. Now if only I could fit a couple of cars in....
You can run out of room fast.
I'll try and post some new pictures as soon as it stops snowing.
|02-03-2004 10:03 PM|
I think this will work..
|01-31-2004 07:23 AM|
Hey Malibucdl, I think you've got a car in there. If only I had a scanner I'd show mine. Trust me, mines got more in it!
|01-30-2004 06:15 PM|
This is how mine looks right now. Standard 2 car garage, painted floor, and way too much crap!!!
I can't wait till we get our storage shed!!!
|01-30-2004 11:59 AM|
|Beenaway2long||look in the gallery for the polebarn pic. I'll update when I can see the whole building, and the 56x26 garage.....|
|01-30-2004 04:49 AM|
|montea||i got a 17x23 garage, to damn small for 2 cars is all i gota say. i will get a picture on here when i clean some of the garage up some.|
|01-29-2004 08:18 PM|
Let's try again
Sorry this pic didn't work....
I will try again..
|01-29-2004 12:59 PM|
|79 camaro 454||i looked at the pics before i read the article and when i saw pic two i thought..hes rebuilding it in his kitchen...my mother would love you.|
|01-29-2004 12:47 PM|
|BoomerADF||Right now I am just doing my engine work etc so its in a 16x24 shop. Car work will be done in a 24x24 garage since the shed which is 40x40 has a dirt floor|
|01-29-2004 02:39 AM|
|7skylark6||I wish i had a big house with a garage i just live in a trailer with no porch or nothing. Thats were i do my work at.|
|01-29-2004 02:25 AM|
40Ford...Open your pic in MIcrosoft Paint and save it as a JPG instead of a BMP and it should be fine.
ChevyGuy...Looking forward to seeing pics of your garage!!.
|01-28-2004 09:17 PM|
WOW I FEEL REALY BAD!!!!!!
I have convinced the wife to kick a horse out into the cold....oh poor horse...
Pored some conctete and put up some insulated walls, sliding door. and it is just raw wafer board walls. It is "JUST BIG ENOUGHT" to fit one of our trucks in. Mine is "out under the snow"...
Sorry it tell's me the message is to big to post with the pic...
|01-28-2004 08:44 PM|
I've got a 20 by 22 garage that I really wish wasn't in Wisconsin. Seriously, it's better than nothing while working on my '78 Monte. Guess i'll insulate before next winter.
|01-20-2004 05:37 PM|
I do not have pictures yet but my garage is my hideaway. It is 2 cars wide and 45 ft deep. It has gas hot air heat, drain in the floor to wash cars, stereo, tv with cable, front half is for everyday drivers and has work bench and tv, glass front showcases on side walls for models with lighting on them, pictures with those light bulbs built in.
The back half is the work area with all the toys ya need. The front and back are seperated by 4 hinged 4 x 8 panels on hinges. conserves heat and neighbors cannot see as much if door is open
|01-19-2004 04:42 PM|
You guys are so lucky having big yards with the space for nice workshops . With the UK being a much smaller place all the houses are closer together unless your way up the ladder . The average garage that comes with a house is 8 X 16 , my house was built in 1902 before there were any cars around - I don't even have a drive and trying to rent anything of a decent size is too expensive just to use for a hobby .
I'm trying to find something right now for when the 55 gets here
Maybe it'd be better if I left my 55 in the US and just moved myself to where it is
|This thread has more than 15 replies. Click here to review the whole thread.|