|02-09-2004 04:27 PM|
There is no setting for a powervalve. It either works or it doesn't.
Are the float bowls filling up and staying full? If not then you might have a piece of gunk stopping up the needle/seat.
Do you have constant fuel pressure? At least 4-5 psi.
|02-09-2004 01:25 PM|
|67bird||i thought it might be that so i am letting the car sit for now and i will go try in an hour or so! but my nieghbor said something about the power valve being set? do i have to do anything with that?|
|02-09-2004 01:17 PM|
pontiac won't start?
Rat Rods Rule!
|02-09-2004 01:13 PM|
motor wont fire with new carb
i just bought a remanufactured holley 600 with electric choke, i took off the old one which was the same off of my pon. 400, and first when i put the carb on it fired right up, but then when we tried to mess with the gas it shut off and wont start back up! i have spark and have checked my floats, i cant figure out why it wont fire? please help