|11-22-2002 03:00 PM|
Check out these sites they can probably help;
<a href="http://www.classichemi.com/" target="_blank">http://www.classichemi.com/</a>
<a href="http://www.thehemi.com/" target="_blank">http://www.thehemi.com/</a>
<a href="http://www.hotrodsandhemis.com/" target="_blank">http://www.hotrodsandhemis.com/</a>
you'll need to check pin height and size, but if you punch the 354 out .060 the hole will be big enough.
|11-22-2002 06:29 AM|
Early Hemi pistons
I have a 56 Chrysler 354 hemi that is ready to go to the machine shop as soon as I buy the pistons. Which is the problem. I have been told that I can put 392 pistons in it. But the CR will be lower. On the other hand I have been told 392 pistons will not work. Can anyone tell me the correct answer?