Hot Rod Forum banner

Help with HP

1K views 1 reply 2 participants last post by  mustang66maniac 
#1 ·
I am redoing a 1965 chevelle ss when i bought the car it had a 350 in it. ran good with a mild cam. i tore it down and put a new cam in it , a summit cam and lifters 234 244 @.50" lift .488" .510" with a lobe separation of 114. also put a edelbrock manifold with a Holly streetavenger 670 carb. it has 10to1 compression with 76cc heads with large valves and dome pistons. if this helps it has a th350 trans with a b&m shift kit with 4:10 gears in rear end.
What kind of Hp can i expect. Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top