|05-20-2004 05:55 PM|
|FASTMONTE||Boy did i jack up!!!! I thought this was the engine forumn.... OOOPPPSSS|
|05-20-2004 05:53 PM|
|BarryK||Yea, I guess! This is paint and body.|
|05-20-2004 05:49 PM|
|FASTMONTE||What do you mean wrong forumn. You mean to talk ETs? Ill have to try that . I have it set at .45 right now and i want to get the optimum fuel burn...|
|05-20-2004 05:44 PM|
I had same set up as you, so you just need to test. It ran good
at .055 but when done fine tuning, the tank of a 1955 was 11.9-12.1 in quarter.
There is just a lot of little things in the engine that will dictate where you should be, each engine and cam is different.
This is wrong forum for this. We will get spanking!
|05-20-2004 05:40 PM|
|FASTMONTE||That is a huge gap!!! How was you car running when you were at the smallest gap? Since i have the MSD is this possible to have a big gap like that?|
|05-20-2004 05:32 PM|
Yea its a good start. My 388 stroker with platinum plugs I started at .055 and increased .003 until it ran 1/8 the best. I painted about an 1/8 mile in road and used GPS to test. I ended up at .072 and 21 degrees before tdc. For peak tuning.
The difference from start to finish was a gain of 16 mph in the 1/8
but two days work.
Thats not the stroker you see pictured, its 57 312.
|05-20-2004 05:15 PM|
Spark plug gap
I have a H.O. 350 crate motor with roller rockers and an MSD ignition and i am running Autolite AR133 spark plugs and i was wondering what is the biggest gap i can go? I heard i could go .60 is this true?