|05-28-2004 10:23 PM|
dodge challenger in need of rear end advice.
dodge challenger that i was told has a 4.10 rear end in it with a 8.75 rear axle.
what should i do with the rear end since the car has a bit of trouble getting up past 120 mph, and im going to be doing some fairly major work i believe under the car since its shaking pretty badly after 110 mph at around 5500-6000 rpm which personally i wont be driving it past 60 until i have that fixed since it makes my fear that the [color=yellow]stinking[/color] axle is going to rip right through the floor and rip me and anyone who may be in the car at the time into little pieces
The transmission is a 4 speed manual.
Im sure im not listing all the info you guys may need so please ask for more information and be specific
the engine is a 440 which to tell you the truth with the 4.10 rear end lights up the rear wheels a little to easily sometimes, i think it could go a bit higher in gearing, since i want to be cruising at 70mph at like 3k rpm right now its like 4000-4500 rpm at 70.
Just post what you would like to know to be able to help me out and ill reply asap,