|02-25-2011 07:33 AM|
door handle removal tool for old dodge chrsyler.
|08-07-2010 05:21 AM|
1st....This thread is 6 years old
2nd....we dont allow want ads on the board...if you want to ask a person a question of that nature, PM them
|02-14-2010 03:17 PM|
KD tool #435
This is an interior door handle removing tool for 1956 Chrysler Corp cars (and no doubt for several other years, I'm sure).
|08-18-2004 09:23 PM|
I'm afraid that would leave a mark with those pointed tongs!
FYI, I've spent about 3-4 hours today scanning the Snap-On site for some of the other tools. Most have apparently been discontinued. I did find an updated model of one of them, a clutch alignment tool...that currently sells for $455!!
I may start a "Can You Name That Tool" thread. Some of these things are really bizarre.
|08-18-2004 07:26 PM|
|helrazr3||that looks like somthing that your wife would use to "grab hold" of you if she caught your eyes wandering to much.|
|08-18-2004 07:18 PM|
|08-18-2004 08:35 AM|
|08-18-2004 03:38 AM|
|KULTULZ||K-D Tools is part of -Danaher Tool Group-. Their website sucks, but it appears that tool no. has been discontinued. You might want to E-Mail them and inquire as to it's application. Someone is probabaly needing one now...|
|08-17-2004 10:52 PM|
I think that's a cv-joint boot clamp tool for big trucks and 4X4's.
Or a manly man tongue piercing jig.
|08-17-2004 10:30 PM|
I have one but dont know what its used for .
|08-17-2004 10:29 PM|
|08-17-2004 10:27 PM|
|MI2600||Maybe someone will recognize this thing:|
|08-17-2004 10:16 PM|
I have a lot of K-d tools now Freebie,freebie,zip,zero ,nada.
|08-17-2004 10:14 PM|
|BstMech||The Ram-o-Matic grease zerk tool is exactly what I suggested to a guy in another thread that had kingpins that wouldn't take grease. They work killer.|
|08-17-2004 09:51 PM|
Try this one. They have illustrations or pictures that might help.
|This thread has more than 15 replies. Click here to review the whole thread.|