|09-08-2004 08:31 AM|
|AlanTA||Just kinda random around on the car.. I first noticed a few on the top of the back quarter, then a couple on the center of the passenger door, then a few on the top of one of the front fenders. It only seems to be on metal, none on the plastic parts yet.|
|09-04-2004 10:26 AM|
|MARTINSR||Exactly where are these spots?|
|09-03-2004 07:45 PM|
Sounds like traped solvent to me.
If you don't make mistakes. your not doing anything.
69 SS/RS full custom Camaro 98 ISCA Grand Champion
69 SS/RS BB Camaro wifes driver
66 Elcamino 350/all dz parts,ac,windows,loaded,my driver
69 SS Chevelle BB conv.fresh frame off
26 T sedan street rod
|09-03-2004 12:44 PM|
|09-03-2004 12:21 PM|
|AlanTA||The orginal paint was lacquer I'm pretty sure, and don't think they stripped it completely... One of the last years for lacquer. Is that probably it then? Argh... I kinda wondered about that when they did it, but completely forgot...|
|09-03-2004 11:40 AM|
With the little info we have and taking this long to show up, here are your causes.
Acid etch primer
single component sealer
|09-03-2004 10:59 AM|
Tiny bubbles in paint!!!
I had my car painted about 2 years ago.. It has been in a heated garage since, and has only been out for shows.. I just noticed in a few areas some small bubbles in the paint, about the size of a pinhead. Looks like air under the surface. WTH!?!? They were not there a few months ago... what would cause this? I'm guessing something they screwed up in the prep work or something... It makes me want to cry.... Paint jobs are not cheap and when you take such good care of it and it still goes bad this quick, something is wrong...