Hot Rod Forum banner

vortec conversion ?

1K views 1 reply 2 participants last post by  MI2600 
#1 ·
I'm swapping an early style 350 for a 97 truck block vortec in my 49 ford coupe.
What alt. bracket do I need for v belt drive on the right side with a long style water pump.
I am also installing a zz4 roller cam with .494/.509 lift onstock heads. spec articles say modify the valve springs and seals. Two of my friends are running that cam with no problems. Are they just lucky. Car is a street cruiser only.
thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top