|12-04-2004 02:34 PM|
|TooMany2count||mmmmmmm can ya tell us where "Spingfield, Or" is??????? cause i have never heard of it before....joe|
|12-03-2004 11:32 PM|
|Kermitt47||You could try these guys for info on the V8 swap. http://www.jagsthatrun.com/Pages/Che..._S-10_V-8.html|
|12-03-2004 07:56 AM|
It's been done alot and therefore there's a LOTTA info on the net about doing this. You can buy a motor mound adaptor kit so you can use the stock motor mounts. A lotta people seem to be having some slight trouble with the headers but block huggers should do. I think you might even be able to use the stock driveshaft depending on the tranny your using.
|12-02-2004 11:02 PM|
|BOBCRMAN@aol.com||Try www.v8s10.org also. Lots of good down to earth info.|
|12-02-2004 07:27 PM|
im sure you will man.
i have seen it done several times.
what are you putting in it?
regular ol carbed 350?
or something nuts?
the first thing you wanna do is take the motor out
|12-02-2004 07:09 PM|
V-8ing a S10
HELLO EVERY ONE!
I came in whith hope that i might fined some one with info on v-8ing a chevy S10. I'm hoping to do the trancfer by jue of 2005. we'll i gess we will see you on the board's.