Hot Rod Forum banner

Question on Piston Ad - Re: Application

871 views 3 replies 3 participants last post by  thenige 
#1 ·
I was checking out Keith Black pistons… and I found the following:

Listed for the following application… Chevy 350ci Stock-Type Pistons for 1969-78 Trucks, 1969-70 Cars, 1990-91 Corvette

350ci Stock-Type Pistons, Use w/5.7'' Rods, .030'' Overbore

· Piston Dia.: 4.030''
· Piston Top: Flat Top, 2-Valve Reliefs
· Comp Ratio: 10.9:1 w/58cc Heads, 8.9:1 w/76cc Heads
· Rings: 1/16'', 1/16'', 3/16''
· Priced as Each, Sold as Set

My question is… why would they be only for those applications? I am looking for some 30 over flat tops for my 76cc heads, and my block is a 4 bolt manufactured from 80-85.

From this description, I cannot see why the application is limited.

Many Thanks, :welcome:
Nigel
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top