|02-07-2005 01:20 PM|
Dittos! If in doubt, relpace them.
|02-07-2005 07:13 AM|
|02-07-2005 06:18 AM|
|Mighty Mouse S-10||No more than push rods cost, if they re not perfectly straight I would replace them. I just don't think it is worth the risk.|
|02-06-2005 11:33 PM|
I think SAATR is right. They're probably slightly, but insignificantly bent.
I tried rolling them on glass anyway and they all rolled. Is that the result one looks for? If they can't roll then they too bent?
|02-06-2005 10:43 PM|
|stepside454||roll em on a piece of glass|
|02-06-2005 10:33 PM|
|SAATR||Could be low spots on the counter, could be a rod just slightly slightly bent, shouldn't hurt you. If you're at all worried, replace it, they aren't that expensive.|
|02-06-2005 10:23 PM|
Pushrods: How straight is straight?
I rolled my pushrods across the kitchen counter and they seemed pretty straight. However, under some of them I could see a hair's width of daylight. Is this straight enough?