Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> Holley carb interchangeability questions
User Name
Password
lost password?   |   register now

Thread: Holley carb interchangeability questions Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
02-21-2005 06:52 PM
lluciano77 The 1850 is a universal 600 CFM carb. It never came on a vehicle.

You have a primary metering block from a 4777 650 CFM double pumper. It will not work correctly with your carb.

You are better off getting a 4150 style Holley that came with a secondary metering plate. Or put the metering plate back on. You are going to end up with the carb not metering correctly.
02-21-2005 06:33 PM
commando57
After some more research

I looked up the 1850 number on Google, info says it is from a 1959 Mercury 383. Anyway, I took off the secondary bowl, (it had an accelerator pump with no actuator arm). The metering block had no power valve or idle screws but it has removable # 72 jets in it. What do I have here? The metering block
has these numbers on it L47772 6501 stamped on it. The list numbers on the
horn are 1850, of course, along with 5752425 and 494. The 1850 is no longer listed on Holley site and the 1850's on Ebay are side hung floats. I will investigate the 3310-1 plates on Ebay. I guess I really need to take apart the
installed carb to get numbers off the plate, to have something to compare.
02-16-2005 05:27 PM
lluciano77 Yes they can physically swap, but the metering won't be right. I have seen universal 4150 conversion kits. Those don't make sense. The 1850 and the 3310 have different idle feed restrictions. Also, the PVCR restrictions are different.

You are better off getting a 3310-1 secondary metering plate. It is pretty close. I see them on Ebay frequently. You can get a core 3310-1 for $25 or less.
02-16-2005 03:47 PM
Max Keith
carb interchange

Yes
02-16-2005 03:22 PM
commando57
Holley carb interchangeability questions

Can a carb with a metering plate secondary (a 750), be changed to a carb with a metering block by swapping in the metering block from a 600. Both square bore, both vacuum secondary's, both center float pivot. Thanks for reading this.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 09:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.