Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Hotrodding Basics> conversion
User Name
Password
lost password?   |   register now

Thread: conversion Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
04-03-2005 02:19 PM
Docs91RS The tbi system on these cars are a return style system. They have a hard fuel line that feeds fuel and one that returns the un-needed fuel to the tank. If you just stick a convention non- return style regulator, such as the ones that come with say a holley blue pump, you'll burn the stock electric pump up in no time. The regulator that most commonly used for this swap is the Mallory Part No. MAA-4309 regulator. Im using it on my 91 Camaro now and it works great. Using the exsisting metal fuel lines that fed your tbi, you run a line from the 3/8 fuel feed line to one of the 4 ports on the side of the regulator then plumb another from one of those ports to the carb. Then install your fuel pressure gauge line into a third side port and plug the fourth. You then plumb a line from the bottom return line port on the regulator to the smaller 5/16 metal return line thats next to the feed line on the drivers side frame rail. Start your engine and adjust your fuel pressure to what holley recommends for your carb which for street use is 6psi. Check for leaks and away ya go. The stock tbi electric pump will work fine for stock and most mild performance applications up to 325 hp anything above that and it begins to lack the volume to keep up.

Doc
03-27-2005 06:46 PM
poncho62 You should install an inline regulator to keep pressure below 7 lbs. Anymore can get by the needle and seat.
03-27-2005 06:41 PM
123456
conversion

hi my name is glenn and i have a 1991 camaro and i converted it from t.b.i. to carborated i have a electronic fuel pump it pumps 5.5-9.5 p.s.i. it is too much for my 600 cfm vacume secondary holly carb i have been killing myself over this problom some one please help i have just purchased a 2.5-4.0 p.s.i. pump would this fix my problem i have tryed holley,spectre,and some off brand and a edelbrock fuel pressure regulators . this is the only remedy i can come up with please help.........

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 03:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.