|04-03-2005 10:15 PM|
|tresi||My guess would be that you burned the valve /seat while running it woth the valves set too tight.|
|04-03-2005 09:33 PM|
|67 Deuce 4 Me||sounds like a valve or valve seat problem to me. Loosen the rockers so the valves wont open and do a leak down test. if you have a mechanical problem it will be obvious. Air will come out of the carb or exhaust or crankcase........Ed|
|04-03-2005 09:09 PM|
|lluciano77||Is the pushrod the right length? Maybe you wore out a cam lobe.|
|04-03-2005 08:38 PM|
350 problems Dead Cylinder!
Recently rebuilt 350, ran very well for 300 miles then started missing badly, checked compression #2 was dead no compression. I readjusted valves on #2 but had to back them off to the point that they make noise to get compression, now I have compression but the miss is still there! The ignition system is fine I have fire on all eight cylinders and the compression on all is 150#
What else do I look for?