|04-25-2005 08:54 PM|
|Gassman||I installed the seal and oring Sat. All went well but you were right. I removed the front part of the valve body but I couldn't hardly hold everything to line it all up at once. Thanks for the reply.|
|04-24-2005 12:05 PM|
remove the valve body.
the transfer tubes simply pull out. It is not an easy task since under the vehicle you need 3-4 hands to line stuff up
|04-24-2005 12:31 AM|
|email@example.com||Maybe these guys can answer your question.|
|04-19-2005 07:27 PM|
I need to replace the seal for the shifter shaft in a 69 FMX, do I have to remove the valve body first. I think I can get the shaft out by removing the front part of the valve body. Do the steel lines just pull out of the body. I think the part I am talking about is the pressure regulator.