|06-17-2005 10:27 AM|
|SkyMan9600||They didn't know I was working 40 hours a week because they always wen't to bed before I got home, lol. I never got home until about 12:00 - 1:30 am and they thought I was getting home at about 9:30 - 10:30.|
|06-17-2005 09:56 AM|
your parents let you work 40 hours a week and then they wonder why they have to ground you for poor grades?
|06-17-2005 09:15 AM|
|SkyMan9600||Yeah, I checked the Intake Manifold, I know all about the notorious cracks, it's the hose, it's split on the bottom. In the mean time though, I have about 70 posts on http://www.crownvic.net , lol. That site is very helpful with every question you ask but they pretty much only know about Crown Vic's.|
|06-16-2005 02:48 PM|
A great site for info is www.crownvic.net
I know you will have fun with that car. It may be big, but it has great handling, good ride quality, it's quiet, power everything....can you tell I'd like to get another one someday
|06-16-2005 01:52 PM|
Welcome back bro!
|06-16-2005 10:01 AM|
|SkyMan9600||Lol, thanks for the enthusiasm.|
|06-16-2005 09:59 AM|
Yes, he's back, back again,
SkyMans back, tell a friend,
|06-16-2005 09:54 AM|
Few more pics...
1.) Stupid leak from the hose UNDER the Intake Manifold.
3.) Check out the mileage, still going strong too
In all seriousness though, I have my hands on a 2003 motor waiting to be installed that only has 2,000 miles because the car was totaled.
Oh yeah, one last thing, the speedometer says 140mph but it only goes 135mph due to the electronic speed limiter... Is there any way to take it off?
|06-16-2005 09:49 AM|
I'm back, again, sheesh
Long story short, I've been grounded pretty much all this time because my grades went to **** whenever I started working 40 hours a week and going to school. But, I got rid of the Mustang and bought a 1995 Ford Crown Victoria Police Interceptor while I was gone! By the way, any of you know anything about overhead camshaft modular motors? I hate these stupid things now. There are NO inexpensive performance parts, I have no idea what I'm looking at whenever I pop the hood, there are wires galore, I don't even know how to replace the computer chip, and there is a stupid heater return hose UNDER the Intake Manifold that is leaking antifreeze and I need to replace which involves taking the entire top half of the freakin' engine apart! By the way, here are a couple pics of it (It's really dirty right now, but I'm going to clean it when I replace the heater return hose in the next 3 days).