Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> Cracked water jacket
User Name
Password
lost password?   |   register now

Thread: Cracked water jacket Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
07-29-2005 03:12 PM
Blazin72 If you do any kind of repairs to that block the engine really should be disassembled to keep debris from making its way into the rest of the engine. If you disassemble the engine then you might as well replace the block. I can see doing something like that to an engine that is a little harder to come by like an old flathead or something of that nature, but on a 350? They're all over the place. It may cost a little bit for machine work and stuff but save yourself the time of having to pull an engine apart twice. Theres no guarantee on how long the repair is going to last either.
07-29-2005 07:25 AM
johnsongrass1 I've got a cerami-sealed modified engine in my car right now.

I've fixed many blocks(exterior cracks) with epoxy.

Welding will work for a while.

Stitching works too.

Best way not to spend much money IMO. grind out the crack and flash the oil out with a torch. Clean with mineral spirit's or the like and JB weld er up. Wait a few day's a nd use a bottle of glass sealer. If the crack isn't to bad it'll work probably through the winter. But in the end, you still got a crack.
07-29-2005 07:11 AM
bamfasm LOCKNSTITCH system works great for this assuming the engine isnt used for performance.http://www.locknstitch.com/Metal_Stitching.htm
07-29-2005 06:45 AM
TurboS10 Welding would be the only option. I still would not do it. It will likely keep cracking. How do you know there are not cracks you can not see??
07-28-2005 10:37 PM
ap0001 What about if I have it welded?????
07-28-2005 10:03 PM
1931 steve I agree with Blazin72 JB Weld is good for certain things but in this case I suggest a new engine block. Its like putting perfume on a pig in the end its still a pig. So patch it up if you like but in the end there is still a crack.

Steve
07-28-2005 09:56 PM
Blazin72 I used JB Weld once. Just about lost a brand new engine because of it too. At the time I put the engine together I didnt have a welder and somebody said to just use JB weld to attach the oil pump pickup to the oil pump. About two months later I noticed that my oil pressure was almost non-existent. I pulled the oil pan and found the pickup just about ready to fall out of the pump. The JB Weld was a bad idea.

In your case I think it's just time for a new block. Water will probably still manage to find its way past the JB Weld.

Besides...if you're gonna be grinding in the lifter valley you're gonna have to pull the engine apart anyway. Unless you want metal debris in your engine.
07-28-2005 09:28 PM
ap0001
Cracked water jacket

72 Chevelle...350.....The ice in my engine expanded and cracked the water jacket inside the valley. The crack is an L shaped crack on both sides of the valley right above the no. 1 & 3, on one side, and the 2 & 4 spark plug on the other. I heard from a neighbor that I could drill a hole at each end of the crack to stop it from running, grind along the crack a little to make it easier to fill, and then fill it all in with JB weld for a quick fix that would let me buy some time to get a new block since this is mine and my wife's second car for work. He swears by it. I thought i'd get a second opinion before I waisted my time. What do you guys out there think???

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 08:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.