|09-08-2005 11:44 AM|
|Bad Rat 414||Make sure you have the correct starter for your flexplate or flywheel. The number of teeth can vary.|
|09-07-2005 08:48 AM|
|tnoftsger||you don't need 1/8" of shims, you need 1/8" space between the bottom of the ring gear and the top of the starter teeth. You use the shims to adjust that gap to 1/8".......|
|09-07-2005 08:11 AM|
High torque mini starter noisey
I installed a high torque mini starter on my 350 and even with about 1/8 inch of shims it still sounds as if it is binding on the fly wheel. This is my first attempt at using a proform 220 should it sound like that or should I continue shimming it?