Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Body - Exterior> Slick Sand help!
User Name
Password
lost password?   |   register now

Thread: Slick Sand help! Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
11-12-2005 02:48 PM
ragenrat638 better moisture control!!!!
11-12-2005 02:25 PM
evilone Hey guys,I just sprayed my first coat of G2 and it seemed to work mutch better than the first slick sand I used several years ago.Thanks for the help!
11-11-2005 08:37 AM
evilone o.k. guys....just ordered the G2...Ill keep you posted on the results....mabey ill post some of the pics!
11-11-2005 05:48 AM
baddbob
Quote:
Originally Posted by evilone
Well I think my Q's have been A'd.I am working on a 77 vette,I have srtipped it and done all of my glass work,then epoxy primed it.Its kinda wavy all over so I wanted to prime it with the G2,and block it.Then I was going to DP20 prime it and paint it!Sounds like I was on the right track,I just wanted to get some other oppinions before I waste my time.Thanks for all the help!!!
You've got a good plan IMO. Applying the epoxy first will help seal that old dried up glass and all of your repairs. G2 will provide the fill you need to block out all your waves, and another application of epoxy will provide an excellent surface for your paint. It will last a very long time and hold an excellent gloss. If you've got some heavy blocking to do I'd start with 120 grit and plan to apply more G2 after that. When she's straight apply guidecoat and final sand the G2 with 400 grit to prep for your epoxy.
11-10-2005 04:45 PM
staircasesurfer i used pcl polyprimer on my 72 Buick, check out the results, i liked it but harder to sand at first, seriously start sanding with 180-220 type grit paper, any finer and you will hate yourself.

here is my site

http://my72skylark.bravehost.com/
11-10-2005 12:26 PM
roger1
Quote:
Originally Posted by evilone
Well I think my Q's have been A'd.I am working on a 77 vette,I have srtipped it and done all of my glass work,then epoxy primed it.Its kinda wavy all over so I wanted to prime it with the G2,and block it.Then I was going to DP20 prime it and paint it!Sounds like I was on the right track,I just wanted to get some other oppinions before I waste my time.Thanks for all the help!!!
I used Slick Sand on my '69 roadster a few months ago and the stuff is absolutely great. You can see some pictures of it in my gallery.
11-10-2005 11:01 AM
evilone Well I think my Q's have been A'd.I am working on a 77 vette,I have srtipped it and done all of my glass work,then epoxy primed it.Its kinda wavy all over so I wanted to prime it with the G2,and block it.Then I was going to DP20 prime it and paint it!Sounds like I was on the right track,I just wanted to get some other oppinions before I waste my time.Thanks for all the help!!!
11-10-2005 07:00 AM
Bee4Me Another nice feature with the 2G is you CAN top coat over it without a 2K primer. I did this on a Chevelle and sprayed Omni MBC, Outside of some missed sand scratches it turned out great.
I sprayed 2 coats of epoxy first and did minor bodywork then Feather Fill 2G coats and blocked it out. On the couple of places I cut thru I just reapplied some more 2G and finished blocking the car with 400 wet.I should have gone 600 but the 400 really looked good enough then painted.
11-10-2005 06:10 AM
rusty428cj The reason I use it because a few years ago I went by this shop that works on Million dollar Ferrari's and custom cars and thats what he used. So I figured if it was good enough for him I would use it. So I copied what he does: strip to bare metal, rust repair, epoxy, body work, 2 coats of slick sand, block with 80, 2 more coats of slick sand, block with 180 and than you are ready for 2 coats of urethane primer with guide coat.
11-09-2005 09:14 PM
crashtech My co-worker doesn't like to use it because he says it's too hard to sand (boo hoo!). I think that the very top layer is a bit tough to get through, but after that it is fine. I like using it on big bodywork jobs because it fills like crazy, and in two years have had NO comebacks due to a primer problem.
11-09-2005 08:14 PM
baddbob If the stuff is used right and not abused it'll last for a very long time. I've never heard of any failures when the product is used right. Apply it over a good epoxy primer for excellent adhesion and durability. Although it specifies that it can be used over an exhisting finish just remember it'll only be as good as what's under it. If you cover old shrinking laquer and deteriorating paints then expect it won't hold up to it's true potential. The only person I ever heard complain about any of Evercoat's polyester primers said he had some spots that stayed soft and didn't harden--and I assume he must not have mixed it completely and didn't strain it so chalk that one up to user error. For years I shunned polyester primers which was a big mistake, it is a very good product when used properly. Featherfill G2 gets my vote.

G2 is available in black, grey, and nuetral. The black is especially usefull on underbody components. Start with a sandblasted metal surface then coat with black epoxy, then black 2G to fill any pits etc, sand and apply another coat of black epoxy then your chassis black or satin black urethane singlestage. The beauty of it is all materials are black so any rock chips and scratches will show very little down the road.

Another area where polyester primers really shine are small parts that are pitted. Parts like convertible top bows, windshield openings, and any parts with intricate shapes. These parts are a PITA to try and glaze even with a brush but spraying on polyester primer is easy. JMO
11-09-2005 07:26 PM
evilone Thanks for the RE guys....does anyone know how good it is in the long run tho?
11-09-2005 03:41 PM
rusty428cj I use slick sand all the time great stuff. Once you mix it you have about 45 minutes before it hardens. I spray 2 coats and block out the next day. When you block sand it turns light gray and you can see the low spots or scatches as they are alot darker. I use SPI black epoxy first so it is easy to see high spots.
11-09-2005 09:49 AM
Bee4Me Slick Sand & Feather Fill 2G are both EXCELLENT products. As long as they are applied as directed,they will outlast most of US.
I use Feather Fill often for "problem child" surfaces and has gotten me out of trouble MANY time's.
Rember that it IS an activated product as it use's the same hardner as fiberglass so your potlife will be ticking as soon as it's mixed.
CLEAN your gun as SOON as your finished as it will harden up SHORTLY.
11-09-2005 08:35 AM
evilone
Slick Sand help!

Hey guys!I was just wondering what everyone thinks of Slick Sand or any of the same type products work.I am mostly concerned with the life span of the product and the warranty issues.Thanks in advance!

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 05:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.