|01-08-2006 05:43 PM|
Yes I have and I really like it. It's much more comfortable than the
DA and stays flatter with only one hand. It does hog the air, but about
the same as my DA. I did some sanding on a hood's clearcoat and it
really seemed to get it dead flat. I also tried it on some wood in my shop
and it seemed to not work as well there. It wanted to hop a little.
Maybe if I get one of those cushion pads for it, it will do better.
For my woodwork I think I'll stay with my electric random orbital sanders.
But for the car wet sanding this thing is great.
It seems to be pretty well built so I hope it lives up to the Porter Cable
reputation. I'd recommend this tool for those that have enough air to
power it. I think it's about 15cfm at 90 psi.
|01-07-2006 02:05 PM|
Its after Christmas and just wondering if you happend to try it out yet?
|11-15-2005 03:02 PM|
The true DA can either be rotary or random orbit just by flicking the adjustment..Body shop guys like these because one tool does most of the work..use the rotary motion for fast removal and the random action for finer work..like having 2 tools in one..once you have used a good one you will never wish to go back to any other sander..
|11-15-2005 02:20 PM|
Well I don't know. It is a finish sander.
It is random orbit and ONLY random orbit.
This is where I'm confused.
Isn't a DA a "Dual Action" and is that different than random orbit?
Someone needs to explain this to me
|11-15-2005 02:09 PM|
Thanks Jim, I just looked at it...It is not a "true" DA though right?? It is more like a finish sander like my hutch... I dont see where you can adjust it on the side for grinding or DAing like a "true" DA has.
|11-15-2005 01:00 PM|
I found it on the net at a place called Kimco USA
They're having a "blow-out" sale right now
|11-15-2005 12:57 PM|
|DUCKY||Where can I find the Porter Cable palm sander that cheap?|
|11-15-2005 12:35 PM|
Here I am Bro!!!
I just purchased a Porter-Cable palm air sander.
It's for Christmas from my wife so I probably won't be able to
try it out till then.
It's a new air sander that PC is trying to compete with Dynabrade
And Hutchins, those two are the best of the best.
PC has a 5" and 6" model that comes with or without vacuum hook-up.
They retail for around $180.00 but if you look on the net they can be
had for around $110.00. I found one for $100.00 with shipping.
For that price I decided to get one.
I am going to use it for my woodworking too, but I won't be able
to report on it untill after Christmas
They use 15 cfm at 90psi just like the big boys do
so you better have a compressor that's big enough.
|11-15-2005 12:21 PM|
|DUCKY||I'm interested in the palm sander, I have a DA.|
|11-15-2005 12:04 PM|
|BondoKing||Hey Jim post up what you just bought for around $100... I think he got a porter cable DA.... Where you at Jim ... I will pm him|
|11-15-2005 12:02 PM|
Read this write up Brian put on the forum a little while back... As for the DA I dont really know of any cheap one that is better than another... I do know that Hutchins makes a great finish sander like for sanding clear etc, and Dynabrade makes a great true DA,.,,,, but you are looking at $180 for the hutch and 3-400 for the dnya....
I am bumping this thread so maybe someone else can chime in for ya bro
Great tool review
|11-14-2005 05:09 PM|
Auto Body Tools
Ok, I need to do some minor body work on a truck im gonning to paint. This is my first time around and I need help buying tools. Im on a budget so I dont want to go fancy.
Here is my selection can someone give me some insite?
Besides one of these kits i was going to purchase a DA sander. Specific brand thats good for the money?
the extent work will be sanding, leveling the panels with one nice big ding on the top of the bed right under the cab rear window. spraying and wet sanding.
right now im mostly interested in tools for the prep, I will research my spray gun seperately seeing as that subject has been covered in some length.