Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> LAST MINUTE HELP...289 to 302 or stroker
User Name
Password
lost password?   |   register now

Thread: LAST MINUTE HELP...289 to 302 or stroker Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
12-14-2005 02:41 PM
xntrik I forgot to say,....... use the 302 crank and rods in whichever block... the pistons are the same.
12-14-2005 11:29 AM
saabstorey
Good luck

Sorry I have no advice, but good luck.
Let us know how it turns out.
What is this for?
12-14-2005 11:16 AM
xntrik The blocks are interchangeable if they both are 6 bolt bellhousings.

I would build a 302 cube, never a 289. There is 16 hp and 16 lb ft torque difference..... apples to apples....

the heavier crankshaft is basicly irrelavent.

I prefer the 5.0 pistons in a 302. The narrower rings make more power. CompCams XE 268 H cam. Performer RPM intake, Edelbrock 600 carb.

If you have offset piston pins, Joe Sherman insists that on a 302 it is worth another 20/20 or more to install the pistons with the pin offset backwards.

The 289 closed chamber heads properly done with big valves are worth another 30 hp.

Joe Sherman is the guy who gets 400+ hp out of factory iron headed 302s with pretty mild camshafts...
12-14-2005 07:59 AM
357f-150 What are you trying to do?

A 289 crank in a 302 block, will give you a 289.

A 302 crank in a 289 block, will give you a 302.

289 and 302's basically use the same engine block.
12-13-2005 04:56 PM
exiled1
LAST MINUTE HELP...289 to 302 or stroker

Well I've been asking about the 289 stroker...and i got some input...The 302 finally came in and now i have a 289 disassembled and i have a complete 302 which i am disassembling tonight ! JUST wanted to see if anyone had some last minute advice or even engine building 101 w/ 289 302/stroker engine . i believe im supposed to use the 289 crank with the 302 block and the 289 heads and i have some new pistons which have a .20 stamped on them...is this good or bad? they say performance pistons...and i have the felpro engine rebuild kit...what else should i know??? don't i have to shave off some of the pistons? or is there something i am supposed to do that i don't have written down? i have a edelbrok cam and timing chain...any help would be appreciated.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.