|01-15-2006 02:14 PM|
|Henry Highrise||Should be able to just go around the edges and pry the clips out on both sides and the bottom, might be a couple of screws in the arm rest to remove also, then lift up and out and it should come off. If you do not have power windows you may need a window handle clip removal tool.|
|01-15-2006 02:10 PM|
Should just be able to take out a few screws and just pop it off carefully. Doe it have manual windows and locks? With the windows you just have to pop off the handle crank by taking the clip off the back of it with a small screwdriver.
|01-15-2006 01:58 PM|
|burninrubbah617||its an 87 chevy caprice|
|01-15-2006 01:18 PM|
|Henry Highrise||The same way you remove the passenger side...J/K What year and model car are you working on?|
|01-15-2006 12:53 PM|
|swvalcon||what year and what kind of car?|
|01-15-2006 12:48 PM|
how do I remove the interior drivers side door panel without damaging anything?