|04-14-2003 06:55 PM|
|BOBCRMAN@aol.com||there are several different tailshafts for the 700-r you just have to find the one that works for you, try a good trans shop.|
|04-14-2003 05:23 PM|
My 700r uses the same mount as a turbo 350. I use the early type with 2 bolts in the bottom (newer ones use a single stud, I beleive)
Good Luck, Mark
|04-14-2003 05:58 AM|
I have a 93 corvette engine and transmission that I will soon be installing in my 48 ford pickup. I recently bought a transmission crossmember kit from a hotrod dealer but the rubber mount doesn't fit. The tail shaft on the 700r4 appears to be different than the standard one. Any ideas or suggestions?