|01-29-2006 08:27 AM|
Not having a crossmember was never a problem for us when we rodded 55-56 Chevy's in the sixties. My 56 had a stout 292 (283 over .060) with a Muncie 4 speed. I used to power shift the snot out of it and it never gave me any problems.
It is a simple matter to fabricate a trans mount out of tubular steel if you are so inclined. Please do not use angle iron however, it looks really tacky. If you decide to add a trans crossmember you may as well go ahead and convert to side mounts on the engine also.
|01-29-2006 07:13 AM|
You will need both unless the engine was already converted to side mounts.
|01-29-2006 03:39 AM|
55 Chevy 4-speed Cross Member?
MY 55 CHEVY HAS A BUILT 350sbc BACKED WITH A 254 MUNCIE 4-SPEED AND IT STILL HAS THE OLD STYLE BELHOUSING WITH SIDE MOUNTS,,, ONLY THING THAT IS HOLDING MY TRANS IN IS THE DRIVESHAFT AND 4 BOLTS GOING 2 THE HOUSING. I NEED TO KNOW WHERE IS THE BEST PLACE TO BUY A NEW CROSSMEMBER FOR THOSE CARS PRETTY CHEAP OR WHAT KIND OF BRACE CAN I USE MAYBE FROM ANOTHER YEAR THAT WILL HELP SUPPORT THE TAIL SHAFT BEFORE I DROP MY TRANS OUT ON THE HIGHWAY 1 DAY LOL THANKS FOR ANY HELP DAVE