Hot Rod Forum banner

power loss

869 views 2 replies 3 participants last post by  docvette 
#1 ·
250 in-line 6 cyl. chevy. I have rebuilt the engine, set the valves, etc. Truck will start and idle smooth, seems to be ok in first gear, however when you shift to second it seems to loose all power. Also I put a new exhaust system on it and after I put the new muffler on the exhaust pipe at the manifold is red hot and glowing after a short drive.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top