|11-14-2001 10:00 PM|
|KULTULZ||Insert the yoke into the tailshaft bushing so as the travel is halfway and measure the distance from the yoke u-joint centerline to the rear flange centerline with the suspension loaded.|
|11-14-2001 02:21 AM|
I have a 54 f-100 with a 351w, c-4 transmission and a 9" rear end. where would I measure the driveshaft so I can have it cut and welded back together instead of loading the whole thing up and trailering to the shop.
[ November 16, 2001: Message edited by: olesonjl ]