Hot Rod Forum banner

Need measurments of Auto Meter gauges.

1K views 6 replies 3 participants last post by  Fordy8man 
#1 ·
im not sure if this is the right area for this but im looking for measurments on this set of gauges from Auto Meter. they are the artic white street rod gauge set.
i need the hole size for the speedo and the smaller gauges and also the diameter of the speedo and the smaller gauges from outside the chrome ring. i need the measerments for a dash panel im mechining out for my truck. thanks alot
 

Attachments

#2 ·
Those measurements are available from the AutoMeter web site, just download the instruction sheet for the gages your interested in.

The street rod speedo and tach are 3-1/8"
The other smaller gages are 2-1/16"

Go to their web site first and look before you cut.


Vince
 
#4 ·
Fordy8man said:
i know the hole sizes but i also need the face diameter and the site does not tell you that.
Ok sorry I didn't understand what you were asking. I have a set of Autometer Platinum streetrod gages in my dash. I am at work at the moment, later I will post the measurements.

Vince
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top