|05-03-2006 04:53 PM|
|Fordy8man||thanks alot. that will be very helpful.|
|05-01-2006 06:31 PM|
The larger gages are 3-5/16" O.D. The smaller gages are 2-3/16" O.D.
|05-01-2006 12:56 PM|
use the "contact us" on the Autoguage site and ask?,
find a ph # on the Autoguage site and call and ask?
send a email to summit and jegs and ask
|05-01-2006 12:32 PM|
|05-01-2006 11:10 AM|
|Fordy8man||i know the hole sizes but i also need the face diameter and the site does not tell you that.|
|04-30-2006 06:21 PM|
Those measurements are available from the AutoMeter web site, just download the instruction sheet for the gages your interested in.
The street rod speedo and tach are 3-1/8"
The other smaller gages are 2-1/16"
Go to their web site first and look before you cut.
|04-30-2006 05:34 PM|
Need measurments of Auto Meter gauges.
im not sure if this is the right area for this but im looking for measurments on this set of gauges from Auto Meter. they are the artic white street rod gauge set.
i need the hole size for the speedo and the smaller gauges and also the diameter of the speedo and the smaller gauges from outside the chrome ring. i need the measerments for a dash panel im mechining out for my truck. thanks alot