|08-31-2006 06:36 PM|
I found it and I now know the engine .
|08-29-2006 07:42 PM|
|paulo 1||Look for stamped alphanumeric at the front-right deck,near the gasket.|
|08-29-2006 06:43 PM|
Thanks for the help 58chev
I will look at that location.
|08-28-2006 09:53 PM|
The date code should be just above the bellhousing, If the engine is stilll in the car it makes it a bit harder to see the stamping.
On the back of the block there should be the block code and just over a bit from that should be the date code.
|08-28-2006 07:20 PM|
I tried that page and no luck, thanks Joe.
|08-27-2006 09:56 PM|
|TooMany2count||here's a PAGE u can look through that may help u.......joe|
|08-27-2006 08:12 PM|
|coupster||I have found Mortec.com to be very informative on finding dates and numbers on Chev engines. Mike|
|08-27-2006 07:56 PM|
I need help with small block engine ID chevy
I have a 350 but i'm not sure of the date it was manufactured and where, if you can help please give as much info as possible. I did look on several web sites and had no luck. The numbers are VA065270.