|10-27-2006 10:09 AM|
This thread has some good info on it.
That Ad-engineering kit is a tish on the spendy side, but when you consider the fact that you can have your body mounted on that frame in about a weekend... it might be work it.
|10-26-2006 07:46 AM|
1954 chevy pick-up frame swap
Deuce, thanks for the heads-up on the frame swap article, i read each and everything i can about what i am going to do, and i have learned a bunch, ADEngineering.com makes a kit using a 1980's vintage 2WD s-10 standard cab long bed pick-up because the wheel base is right on target and they offer a kit that looks better and better to me all the time, all the other s-10's extended cab etc. have different wheel bases and require more work, later, thanks.
|10-22-2006 11:08 PM|
This article is listed under the Wiki ...
check it out
It shows a Ford body swap but would be informative for your swap also .
|10-16-2006 03:04 AM|
1954 chevy 3100 chassis upgrade
as far as chassis upgrades i was just wondering about swapping in a chevy S-10 2WD standard cab long bed frame or what other options are available without cutting the frame in the middle and 4WD would be great too but not required, heavy half or 3/4 ton a plus and vehicle manufacturer not a concern.