|01-26-2007 10:18 PM|
If you haven't already, check out this site:
They are great trucks. I owned a 71 long fleet for 10 years. I put in a 99 350 L31 Vortec/4L60E before I sold it. Great conversion.....basically bolt in and you get the driveability and fuel economy of the fuel injection...
|01-25-2007 10:43 AM|
re: Potential '72 C10 Project
Here's some other suppiers:
|01-20-2007 03:37 PM|
Early classic is a real good company.There a little expensive,but I always know the parts will fit the first time I buy them.Im planning to get thier 1pc window kit and electric window kits soon.
4/6" drop kit
I would do a 383.They work good in trucks when you want some performance in a small block.I would start with the suspension,Then worry about getting the performance out of it.If you already have a running engine you should be good for now.
383 stroker kit
|12-19-2006 06:12 PM|
I like the 72s with frasme shortened with a 88 to 98 short stepside boxs. I've seen factory long & short box 72s I like.
pics are of a 69
|12-19-2006 04:47 PM|
Potential '72 C10 Project
For Christmas my wife told me to go buy a truck. I have been looking at a '72 Chevy online and plan to go see it in person as soon as possible. The truck is listed for $1850. It had a new GM Goodwrench 350 engine put in about 50,000 miles ago along with HEI ignition. It is a long bed with a 4 speed transmission that I am assuming is stock. It seems to have very little rust and is supposedly a dependable driver. The current owner has not intended it to be performance oriented, more of a hauler. Any model specific (or not) problems I should watch out for when I go look at the truck?
Also, if I end up getting this truck I will have around $1000 to start working on it. I am not looking to have a show car, more of a daily driver that I can take to the strip for fun. I'm not real worried about the appearence at this point, so my question is, where should I start spending? There are no obvious safety or driving hazards that need to be fixed so my inclination is towards some engine work or possibly lowering it. The 383 conversion seems to be pretty popular and is probably what I am leaning towards at this point.
I've got plenty of time as this won't be a daily driver for me, but the cash will have to trickle in. Let me know what you think.