|02-15-2007 12:03 PM|
|02-15-2007 11:49 AM|
|02-15-2007 09:50 AM|
Check out this link for hardware...
|02-15-2007 09:35 AM|
|02-15-2007 08:51 AM|
Hey Jason -- I haven't gotten around to my door panels yet, although I've been designing them in my head for the past three years and in that process, I've thought about making my own buttons:
Button Covering Machine
Die & Cutter Set
|02-15-2007 07:43 AM|
|02-14-2007 11:13 PM|
seatbelts dont smell...
Horvath...im liking the button idea. some designs look better molded with no hardware, other designs look better when you can see where it was fastned...not the actual fastner itself, just WHERE it was fastned. i dont know what your panels design is but if you think it would look good showing WHERE it was fastned, you might want to try a cabinet maker or perhaps you can use some of the buttons like on old recliners (you know in a diamond design on the front side of the back part (haha it makes sense to me!!!)
think of something smallish that you like the look of. my idea is to use drum lugs (or similar) as my fastner or fastner covers.
im new to this so you all might think im a bit "not with it" but this all sounds good in my head, so im gonna go for it eventually. if i hate it...i'll change it! i really do love this site!!!
(516) Drum Co.
|02-12-2007 09:16 AM|
|brian0605||I saw one 3 years ago for sale at crusin the coast. (Big car show in south mississippi till Katrina anyway) I saw one for sale in jackson MS. at a small car show (it was sweet too) he was asking 14G for it. The 54 2dr wagon is really a cool ride and yes they are difficult to find but they are out there. I love the speed-o-meter too. I am totally ready to be working on my 54!!! I'm like a kid at Christmas I can't wait!!! Brian|
|02-10-2007 01:48 PM|
Too cool, man.
When I was 17, I had a '54 Ford 2-door Ranch Wagon ... put a new engine in it ... drove it out to Los Angeles and back to Jersey ... I loved that car ... had it till I was 22; got married and sold it. Man, I *still* miss that speedometer! I just loved the way it rose up above the dash with that window in the back-side -- that's got to be the coolest design ever. I've never seen another one anywhere since then! Can't find one on the web ... nothin' ... they must all be gone. Anyway, that's why I want a '54 Ford 2-door ragtop as my next project.
The '54 Chevy pickup you see in my avatar is my daily driver. I can't stand anything "new" ... and I detest seatbelts - I don't care what anyone says.
|02-10-2007 11:46 AM|
The 54 looks a lot like the 53, right?
Dan the 52-54 all pretty much the same body, just different grill and chrome pkg's and dashes changed in 54. The 54 is the first year OHV Y-block,first year ball-joint suspension. I wish I could drive this one back but it's a basket case.Getting it with a 239Y-block that was running 12yrs ago when we pulled it out & ford-o-matic trans was shifting, also getting a 59' 292Y-Block out of a truck to eventually build.
Horvath A few years back my brother-in-law (R.I.P) and I had a few cans of liquid intelligence in us and decided to cut the roof off of a 54 ford beater we had(it really looked like a convert). It had fiberglassed floors, high back 69 camaro seats mounted on blocks of wood(seat belts "we don need no stinking seat belts"),Straight pipes out the back and the gas tank was out of some 70's GM car strapped down in the trunk with nylon ratchet straps. Fun Fun Fun, got lots of looks everywhere we went. I May have some pic's around of it If I find them I'll post them. Older and wiser now.......... Brian
|02-10-2007 10:49 AM|
|horvath||And "The shoemaker's son has no shoes."|
|02-10-2007 10:38 AM|
|02-10-2007 03:58 AM|
Thanks for the instruction, Dan ... I'm diggin' it!
Hey, Brian - Words on a computer screen sure do come across a whole lot different then they would in person - that's a fact!
Wow. A '54 Ford 2-door ... sigh ... that's what I would love to have as my next project -- and a ragtop would really send me over the edge!
|02-10-2007 03:02 AM|
|brian0605||By the way Dan sweet 47 5 window, My wife likes the late 40's fords and chevys, she wants me to build a 4dr sedan (3 kids easy in and out),but every time you find one, even in pitiful shape they want 2arms and a leg for it. The price is right on the project I'm fixin to start on 54 ford 2dr sedan. FREE, Just gotta rent a truck and trailer and go get it back in my home town MOBILE,AL. 350mile round trip , Brian P.S. There are no hard feelings here either, sometimes it's hard to read the tone in these post. I'll try to not get my panties in twist next time!!LOL|
|02-09-2007 10:22 PM|
|DanTwoLakes||Alan: No, you would not have to double up on the panel board. The clips are so easy to install with the method I described that even I can do it. The offset clips will not show through unless you use a padding, whether it's closed cell or open cell foam, that is ultra thin. Even that can be avoided by not gluing the padding down directly over the clips. I can't believe that even if you used 1/8" closed cell foam that the clips would telegraph through with the heavy leather over it. If you use a 1/8" panel board with 1/4" closed cell foam over it you should be home free. That would make the whole thing 3/8" thick, not counting the leather. There again, do a small mock-up to find out. Then you will know for sure.|
|This thread has more than 15 replies. Click here to review the whole thread.|