Hot Rod Forum banner

1.3 liter head bolt torque specs

20K views 4 replies 3 participants last post by  machine shop tom 
#1 ·
I'm trying to find the torque specs for a 1.3 liter suzuki,for the head bolts and connecting rods.thanks
 
#3 ·
if a dohc torque is 48-50 ft lbs.
sohc 46-50 ft lbs.
you should have 10 bolts holding the head,start in the middle and torque the 2 in the middle first only to 25 ft lbs. then work your way out in a cris cross pattern,the start in the middle again and this time torque to 50 ft lbs.and then do the cris cross and your done.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top