|03-13-2013 12:00 PM|
|33Willys77||I have had one on my '33 Willys for 7 years - been GREAT!|
|03-13-2013 10:09 AM|
unisteer x rack
just finished installing one of these, units. Very smooth install. Feels like a different car, handling is awesome. No bump steer. and very positive feel.
Turning radius also increased. It's on a 30 2 dr sedan.
|07-12-2007 01:03 PM|
That is just what I wanted to hear.
Thanks for the info
|07-11-2007 03:02 PM|
I've got it in my 29 Coupe. Switched from a Vega box. I LOVE IT !!!
If your Vega box is mounted correctly, it should only take a short time to change over. By "short time " I mean less than an hour.
Good luck !
|07-11-2007 01:27 PM|
Thanks for your info I believe this is my next project. This is what i needed to know. Thanks again.
|07-08-2007 09:18 PM|
|Not A T 25||
|07-08-2007 05:24 PM|
unisteer conversion from vega box
Thanks for the feedback.Im on a holding pattern
|07-07-2007 07:56 PM|
WELCOME to Hotrodders.com
A place where a lot of the Moderators have street rods ...
I have a Uni-Steer in my current 32 Ford 3W project. Sadly , I have not yet driven it. I have the Vega in my 32 Ford roadster ... and it has done well for me over the years but I drove a friends 32 coupe with the Uni-Steer and it was much easier to park and navigate at under 5 MPH. Above that ... it was no better than my Vega box.
You can go here ... http://hotrodders.com/journal_photos...1456602170.jpg to see more of the project.
Again ... WELCOME
|07-07-2007 03:36 PM|
unisteer ford straight axel. feedback
I would like to talk to somebodywho has converted a vega cross steer system on a ford 32-34 straight axel to a unisteer rack and pinon. The pros and cons. Thanks