hi i pulled the frount down the timing chain has fiber gears with parts missing chain is loose.im suprised it didnt leave me stranded.im trying to warm it up a little bit have a new edelbrock cam
204/214 duration@0.50
.420/.442 lift
im sitting here looking at it whouldnt take much to pull heads i allready have gaskets.i have a set of camel hump heads i know the chambers are larger so ill loose a little compression but whould the flow make up for it. and give me a little more. also as soon as i get it back from the rebuilder i have a b&m 144blower i can put on for laughs.
204/214 duration@0.50
.420/.442 lift
im sitting here looking at it whouldnt take much to pull heads i allready have gaskets.i have a set of camel hump heads i know the chambers are larger so ill loose a little compression but whould the flow make up for it. and give me a little more. also as soon as i get it back from the rebuilder i have a b&m 144blower i can put on for laughs.