Hot Rod Forum banner

model a coupe headliner

2K views 2 replies 2 participants last post by  rodd1 
#1 ·
Any ideas would help roof is filled in
everything is done but that
 
#2 ·
if you don't have any orig bows the easiest way is to use untempered masonite or hardboard,1/8" and cover it with material, use one large piece for the main insert then trim the side panels to cover any fastners or seams on the edges, with a little imagination you can make very professional looking headliner.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top