|11-15-2009 11:18 PM|
|critter119||you know my father-in-law and i have had nothing but problems with mac, we have been trying to get 2 rachets warrantied we have called the local tool guy AND mac corp. and still nothing.|
|11-15-2009 09:28 AM|
This is a old thread, but though the info would be interesting. When I lived in Colorado Spring I did some work for a company that was a sub to Craftsman tools. Making everything craftsman sells. Guys where making 5-6 bucks an hour in 97.
|11-14-2009 11:52 PM|
|powerrodsmike||Post reported spammer banned|
|11-14-2009 10:58 PM|
Tools trucks going Down the drain?
I think its amazing that Snapon and Mac will charge you $25 for a socket that probably cost about 50 cents to manufacture and you guys pay it. Chances are I can get the tools to you faster than the truck for 1/4 of the price. Check out my tool store @ ########Com
I am boosting up my inventory as fast as i can. I have several hundred new items each week.
|01-14-2008 11:01 PM|
|crownver||You guys should try Gray tools, if you don't mind paying for quality. Really expensive but I've got a couple of their wrenches I inherited from somewhere and can't believe the quality. Put the Craftsman to shame. I never thought Craftsman were that great anyway, but liked the way you could return them no questions asked.Not sure if the Gray are still the same, but at the price they should be! Anybody bought any Gray tools lately?|
|01-11-2008 09:30 AM|
Our local vocational school bought three "Kent USA " lathes a couple of years ago. They were the typical Chinese stuff sold under bunch of different names. In this case Kent just happened to put their stickers on'em.
They are considered precision lathes, but when any company selling most Chinese machine tools uses the word precision, their idea of precision is that the truck driver takes the same road from the Chinese sweat shop to the sea-port each time.
I wonder if employees of Wal-Mart, Home Depot, Lowes and on and on should be registering as agents of the Chinese government?
|01-07-2008 11:30 PM|
|12-30-2007 06:43 PM|
|Mustangsaly||I see kline in this, http://www.stillmadeinusa.com/shoppingindex.html as a electrician I've bought many Klien tools over the yrs. screw drivers dikes linemans pliers & fish tapes ect. I ordered klien socket's and a few other mechanic tools out of a klien catalog from a wholesaler yrs ago. there top notch stuff with life time guarantee and then when I ordered them in the 80s I paid walmart prices. I've said for yrs I need to order more stuff but haven't.|
|12-30-2007 08:50 AM|
Cornwell , a name not often heard out here at the west end of the country.
I've turned wrenches for decades and i find comments here interesting - enlightening .
Never thought about it much;
my ratchets are Snap-on, most sockets = Snap-on
End wrenches are Craftsman - Snap-on - some Proto - some junk I cut up for special use application
I've got a Craftsman Pro series 3/8 air power drill.... it works great. Good slow speed control
I use the cheap 3/8 impact from Craftsman on my bench (trans work) in about 2 years they wear out, i buy a new one.
OFten i find my Craftsman screw drivers fit various screws better than my Snap-on screw drivers. I have the pro series Craftsman screw drivers now .. they were on sale.
I carry a Craftsman plastic carry box set of tools in my vehicles IF I break down some where. I know they will get the job done and Sears has a tool sale every third day of each week on these box sets
The Snap on dealer comes by the shop each week. Sometimes he shoots the BS , sometimes he is in a hurry. Other tool dealers MAY come by for a few weeks, then they disappear if you do not buy from them every other week.
I have Craftsman Pro series tool boxes. This past year I bought my first new Snap-on roll cab.
I had a Snap-on dealer ask me years ago :" How can you keep your Snap-on tools in an ordinary Craftsman tool box?"... I responded that when I arrive at work in the morning the tools have not jumped out onto the floor to save themselves
|12-30-2007 05:34 AM|
|12-29-2007 11:18 PM|
|12-29-2007 10:35 PM|
|shoddy_f-body||Snap on trucks are half loaded with 'Blue Point' crap anymore.Thats their made in Taiwan line but its twice the price of the rest of the made in Taiwan stuff.No lifetime warranty either.|
|12-29-2007 09:12 PM|
Where izzit made?
Interesting that the link to the site for buying "all American" tools specifies that Craftsman is all-USA made. My buddy, who is a distributor for a bunch pf Chinese stuff says (Hope he's wrong!) that the ratcheting box-end wrenches are ALL made by the same supplier, and get stamped as Craftsman, $nap-on Mac, proto, Kobalt, etc, etc when they are ordered. His advice is to get the cheapest ones avail at Wallyworld, Home Despot, Lowes etc as they are all the same anyway. Of course, its not like he has ever BS'd me before.......
However, I've noticed the Craftsman name appearing on a LOT of crap lately - remember those pliers that are made up of layers of thin steel rivetted together?
(My rule: If "Boob" Vila pushes it, its junk, regardless of where it may be made!)
|12-15-2007 09:15 PM|
|chevy7283||If you look at it both Miller and Hobart welders are owned by Illinois Tool Works.|
|12-15-2007 07:41 PM|
|oldred||That's a good link and there were some surprises there but under Stanly/Proto watch out because most Stanly branded hand tools are from Taiwan. Also I noticed that under the USA made welders they pointed out that Hobart welders are made in Troy Ohio (Already knew that, they have been there forever) and that they are owned by Illinois Tool Works, so much for that "Miller owns Hobart" BS!|
|This thread has more than 15 replies. Click here to review the whole thread.|