Hot Rod Forum banner

Suggestions on good Heads

811 views 5 replies 5 participants last post by  techinspector1 
#1 ·
Im looking for some sbc heads that will have a high cr and will work decently with a edelbrock rpm manifold.

Can anyone tell me a good set thanks.
 
#4 ·
chevy350_Camd said:
Im looking for some sbc heads that will have a high cr and will work decently with a edelbrock rpm manifold.

Can anyone tell me a good set thanks.
If you will look up near the top of the page and click on Knowledge Base...then key in ...sbc heads...and then click search...you will find lots of good information on heads.. The Knowledge Base is a great place to learn.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top