|02-08-2008 07:20 AM|
There may be some differences between f1 and the later f100 brakes, the f100 brakes are a common swap.Check this article out,
Courtesy of Deuce..
And a little more info by Pasadenahotrods regarding which spindle you may have and bolt patterns and such...
I found those using the search function here on the site.
Hope this helps, mikey
|02-08-2008 07:08 AM|
|speedydeedy||How about posting pics of your spindles and backing plates. Maybe you don't have what you think you have.|
|02-07-2008 02:03 PM|
49' F1 brakes on 39 Ford spindles
What is required to fit 1949 Ford F1 brakes to my 1939 Ford spindles? I was told to elongate the holes on the backing plates to make the bolt holes line up, however this is not what I have read on previous forums.
Other rodders have mentioned that this is a straight fit and a bolt on job. This did not seem to be the case last weekend when I tried to bolt the backing plates up.