Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Suspension - Brakes - Steering> 3/8" female to male flex line needed. Any cars front wheel cylinder frame line?
User Name
Password
lost password?   |   register now

Thread: 3/8" female to male flex line needed. Any cars front wheel cylinder frame line? Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
03-12-2008 02:47 PM
Ripped
Quote:
Originally Posted by Triaged
You could also get a female inverted flare to AN-3 adapter, a pipe thread to AN-3 adapter (and remove the adapter on the slave already), and a prefabbed AN-3 flex line. Should be available at any speed shop.

...or just go to a GOOD parts store and see what they have. Front drum brake flex line sounds like a good start to me. Something like this from a '68 Impala maybe?...but it doesn't list the fitting sizes.
http://www.napaonline.com/MasterPage...e+Hose+-+Front
Thanks Triaged

I tried a couple parts stores, third time lucky I actually got someone who would look something up.

Anyway for future reference BH36744 is what I ended up getting
03-12-2008 12:13 PM
Triaged You could also get a female inverted flare to AN-3 adapter, a pipe thread to AN-3 adapter (and remove the adapter on the slave already), and a prefabbed AN-3 flex line. Should be available at any speed shop.

...or just go to a GOOD parts store and see what they have. Front drum brake flex line sounds like a good start to me. Something like this from a '68 Impala maybe?...but it doesn't list the fitting sizes.
http://www.napaonline.com/MasterPage...e+Hose+-+Front
03-12-2008 10:57 AM
Ripped
3/8" female to male flex line needed. Any cars front wheel cylinder frame line?

Hey guys. I am rigging up a hydraulic clutch line for my 'stang. The wilwood master and pull slave use a 3/8 - 24 inverted flare fitting on both ends.

I am going to bend a hard line to run from the firewall down to beside the bellhousing/toploader where the pull slave will be located. There must be a car that has a female to male 3/8- 24 flex line similar to what would be used on front disc or drum brakes (likely drums)

The front disc brake hose I have is 3/8" female to a banjo fitting. All I would need is the same type of hose ending in a 3/8 male inverted flare.

I need a flex line 10" - 16" long

Pull slave i am using

Master cylinder I am using

Thanks for any help.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 10:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.