Hot Rod Forum banner

Performer eps manifold....

2K views 3 replies 3 participants last post by  75gmck25 
#1 ·
... The manifold I have , but have no gaskets, Looked up the manifold and the gasket suggested has just 2 peices, None for the front back end of the manifold, I guesss just seal that up with gasket sealer??
 
#4 ·
Did you get installation directions with the manifold? The Edelbrock instructions (they are online) tell you to not use the end gaskets, and seal with a bead of RTV instead.

They also tell you which main gaskets to use, and a couple types/brands to avoid. The suggested gasket is a little thicker, and has a silicone bead around the water jackets.

Bruce
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top