|05-10-2008 01:09 PM|
I know some newer vehicles have that rack and pinion stuff...so..IDK???
|05-10-2008 10:57 AM|
57 ford R/P vs stock
Have 57 RW...installed GEARHEADS p/s box-JUNK.Did WURTH-IT RACK drives great!Did you see my swaybar tread?
|05-02-2008 02:16 PM|
Not sure why you would want to go all the work to install a rack and pinion setup. The '57 had a pretty good recirculating ball steering box and a fairly straight forward front suspension. I've had two '57's, a convertible and a tudor without power steering and the steering effort wasn't bad, especially with the big diameter steering wheel.
|05-02-2008 02:02 PM|
|firstname.lastname@example.org||Could be quite inexpensive if you go the junk yard parts route or very expensive if you go the aftermarket parts route. Could be very simple if you have all the right tools and skills or virtually impossible if you are a novice car builder.|
|04-30-2008 08:39 PM|
Rack and Pinion in a 57' ford
Seen a thread or two...but curious on if i should go power rack and pinion or power steering,it has none as of now :-P..Heard of cavalier conversions, how hard and expensive is this?