Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - No Spark!!!!!!
Thread: No Spark!!!!!!
View Single Post
  #1 (permalink)  
Old 03-06-2009, 12:10 PM
Mr AMC Mr AMC is offline
Registered User
 
Join Date: Mar 2009
Location: Parma, Ohio
Posts: 7
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
No Spark!!!!!!

I have a '60 Rambler Ambassador Super with a 327 2 barrel in it.
I can't get any spark.
I have replaced the coil, points, condensor, distributor cap, the rotor is fine, tried a good balast resistor.
I can't get any spark at all. I thought it could be the wire off of the coil so I put it on a truck and the truck fired right up.
I tried to clean the contacts on the ballast and any other connections I could think of but no luck.
I came here to seek advice.
I do not have a shop manual for it yet and wanted to get it up on my own, but I have to get some help. Thank you.
Mr AMC
Reply With Quote