Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Not sure where to start on this one frame mounted master cyl
View Single Post
  #5 (permalink)  
Old 09-19-2011, 09:59 PM
cucumber1949's Avatar
cucumber1949 cucumber1949 is offline
T-Bucket, Corvette, Mustang
 
Last wiki edit: Removing stuck fasteners Last photo:
Join Date: Nov 2004
Location: Greater Cleveland, OH
Age: 65
Posts: 507
Wiki Edits: 1

Thanks: 0
Thanked 5 Times in 5 Posts
No, don't have a photo of my setup, but I took a look at the website I referenced in my link above and found their instruction manual:

http://www.spiritcars.com/images/pdf/AssemblyManual.pdf

If you look on pages 3 and 9, I think you'll see how they do it on their vehicles.

Just as an aside, I notice they put a proportioning valve on the line to the front brakes which is probably not correct for anything other than something like a T with very slender tires up front - typically don't see those anymore due to ride and wear issues.

Good luck to you.

Last edited by cucumber1949; 09-19-2011 at 10:00 PM. Reason: typo
Reply With Quote