|
|
|
01-20-2004, 04:12 PM
|
||||||
|
||||||
nudder 377 question
Me Again, HG.
Not sure if this 377 buy is gonna work out, but at least with these questions I'll understand more about em. When getting a rebuild kit, do they make em for the 400 with the 350 crank? If I must use 500 dollar pistons, I'll never be up to that. HG 
|
|
01-20-2004, 04:18 PM
|
|||||
|
|||||
|
You can use a stock 400 piston with a 5.7" rod. That puts the piston .010" of the hole if it is a 1.580" CH. Now if they figure on a 9" deck with a 1.560" you will be .020" in with a virgin block.
Cstraub
|
|
01-20-2004, 04:29 PM
|
||||
|
||||
|
You can purchase pistons designed for the 377 with 5.7 rods from speed pro , kb and trick flow I am sure of this
|
|
01-20-2004, 04:40 PM
|
||||||
|
||||||
|
HG,
Take a look here for some decent rotating assemblies for the 377, at a good price. http://www.cnc-motorsports.com/category.asp?CtgID=9003 406chevelle
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
