|
|
|
01-23-2003, 08:06 AM
|
||||
|
||||
oh ya by the way
i have vortech heads from a 92 camaro, on some of the valves they are caved in. can i use valves from another sbc head if there still good.
|
|
01-23-2003, 08:15 AM
|
||||||
|
||||||
|
as I just said on your other post. if there 92 heads there not Vortecs, what are the casting numbers of your heads? post the casting numbers so we can tell you what kind of heads you have because the heads play a big role in power output.
|
|
01-23-2003, 08:17 AM
|
||||
|
||||
|
alright ill get the casting #
|
|
01-23-2003, 09:13 AM
|
||||
|
||||
|
were are the casting #'S i looked on the top were the valve cover would go, in between the rocker arms, is that it
|
|
01-23-2003, 09:39 AM
|
|||||
|
|||||
|
Yea its like 6 or 7 didgits long.
|
|
01-23-2003, 10:45 AM
|
||||
|
||||
|
14102187 is the numbers
|
|
01-23-2003, 11:14 AM
|
|||||
|
|||||
|
Your heads check to-- 1986 to 1991 305" engine with 1.84" intake valves and 1.50" exhaust this is not a performance casting.
|
|
01-23-2003, 11:46 AM
|
||||
|
||||
|
how can i beef them up a little, and should i try to find some vortech 202s
|
|
01-23-2003, 11:50 AM
|
||||
|
||||
|
Junk those heads! Get some Dart Iron Eagles, they are inexpensive and good.
|
|
01-23-2003, 11:52 AM
|
|||||
|
|||||
|
It's really just according to what kind of H.P. you want to build. But, if these heads are going to need work anyway, I would just go look for a set of vortecs. The vortec heads have 1.94 valves from the factory but they flow better than most of the older castings with 2.02's
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
