|
|
|
10-16-2005, 12:44 PM
|
||||
|
||||
|
oil fill tube install on performer manifold
I want to use finned Corvette valve covers on my 327. I do not want to alter thier apperance in any way. I know how to add PVC to manifold, my question is has anyone installed an oil fill tube? The manifold is a Edlbrock performer. There is a slight indent where the tube should go. I'd like to use the press in fill tube from Summit. Is this feasable? It looks like it would have to go to a machine shop. I saw a post on another site that talked about using a hole saw.
|
|
10-16-2005, 01:23 PM
|
||||||
|
||||||
|
Take the manifold and fill tube to a machine shop unless you have a drill press with a table large enough to hold a manifold.
Larry
|
|
10-16-2005, 01:45 PM
|
||||||
|
||||||
|
If you are going to use the drilled PCV hole in the manifold, keep it all neet and clean and just pull the PCV valve out and put a funnel in the hole and fill-er-up! Thats how I do my current engine. The tall valve covers didn't have an oil fill hole so I use the PCV hole instead.
Mark
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Who makes the best oil??? | classic_chevy_guy | Engine | 28 | 02-21-2013 08:04 PM |
| Oil Pressure questions | RObs71Nova | Engine | 22 | 05-02-2009 01:45 AM |
| You mean it’s not supposed to be oil bath? | Barz51 | Engine | 1 | 04-26-2005 07:52 AM |
| oil coming up through dipstick tube | stoneyone2001 | Engine | 10 | 04-12-2004 09:10 PM |
| Pop goes' the oil fill plug ??? | smokin | Engine | 14 | 11-05-2003 04:48 PM |
